A Boat Detailing Necessity
Improve the efficiency of your boat cleaning routine with BoatMaster™️Foaming Cannon! Layers of foam from the Foaming Cannon will create lubricity and help reduce the chances of harming your boat’s paint or other delicate surfaces.
Removes Accumulated Marine Build Up
Easily soak your boat in a mountain of suds to ensure that all that grime, bugs, dirt, sap, dust, and other contaminants from the sea are loose before you wipe them off!
Multiple Nozzle Tips For Different Purpose
The black (65°) and green (25°) nozzles are commonly used in boat detailing. The black nozzle, typically used for soap application, utilizes a 65° spraying pattern which is great for covering large boat surfaces with soap. After soaking the boat with foam, the green nozzle, which is a more focused and concentrated water spray, is good for washing away stubborn spots and stains with its increased water pressure.
Working Condition: 1000 PSI to 3000 PSI
Max Temperature: 60℃ / 140℉.
Bottle Capacity: 1 Litre
Step 1: Fill some soap and warm water into the bottle to get thick foam.
Step 2: Connect the ¼ quick connection plug to a pressure washer gun or wand.
Step 3: Adjust the knob on the top to desired foam level and start foaming your boat!
Yes, of course, you can! We’ve tested it and it is completely safe to do so.
These colored nozzles are adjustable pieces that change the pressure and angle of the spray. Each nozzle sprays out at different angles and either increase or decreases the pressure.
Red Nozzle (0°) – The red nozzle provides a single concentrated jet stream meant to remove the toughest of stains.
Yellow Nozzle (15°)– The yellow nozzle causes high pressure and needs to be used carefully with gentle surfaces. It works great for cleaning away stuck mildew or mold.
Green (25°) – The green nozzle has a well-balanced area of spraying and pressure. This is commonly used for rinsing the boat after soaking it with layers of foam. (The moderate pressure works best to prevent any harm on your boat.)
White Nozzle (40°) – The white nozzle comes out much like a shower set which works great for easily damaged surfaces. This is meant for a large surface area that doesn’t require a lot of pressure to clean.
Black Nozzle (65°) – The black nozzle is for soaking surfaces and works great for applying soap. It gives just enough pressure that you can apply cleaning agents and detergents in hard-to-reach areas. After using the black nozzle to soak down the boat surface, you simply switch to the green nozzle to blast away the soap and dirt.
Most pressure washer gun or wand has ¼ quick connection which connects to the foam cannon.
I find myself wondering why it took me so long to discover and use this Totally changed the way I wash and detail my truck
What can I say other than it froths foam well. Works great with sunjoe SPX 3000 requiring no modification. Just pops on and works. Makes washing the car a breeze. Completely covers car in thick white lather. I imagine if you work professionally you might like more adjust-ability or something, I also cannot speak to how durable it is but I have had no problems. Of course don't leave it attached and go slamming the wand down and you wont break the neck of the bottle.
I love this foam cannon. The only and I mean the ONLY downside it you have to hold re cannon upside down in order for the foam to really get thick but if youre using a short wand its perfect. Definitely recommend
Works great!...I have a craftsman 1.2gpm 1900 psi electric power washer I use with chemical guys snow foam. It came with a foam cannon and it did not work like you would expect so i decided to give this one a try and wow was it a complete difference!
Would highly recommend this product to anyone :)